|
Commercial
MB Series Filter
The
Commercial MB Series Filter
is designed for people who want great tasting, high
purity drinking water in their offices. With additional
modifications our commercial MB Series filter can also
meet the stringent requirements for water quality in
laboratories and a variety of commercial applications
with a zero tolerance for contaminants. We custom design
all of our commercial filters so that we can meet your
flow rate and water purity needs within the space limitations.
The
standard MB Series filter uses mixed bed deionization
resin typically followed by Carbon Block filtration.
This combination produces water similar in quality to
steam distillation but without using electricity, wasting
water or requiring a storage tank. Production rates
are 1+ gpm. The larger the filter the faster the flow
rate.
The MB Series water filter is clearly a superior choice
over steam distillation or reverse osmosis when used
on relatively low TDS water like the Seattle municipal
water supply.
Read
on for information about the Commercial MB Series Filter
-- contaminant removal, features,
dimensions, and applications.
Take advantage of our free site survey. Our knowledgeable
staff will visit your location in the Greater Seattle
area to help you design the system that best meets your
needs. Email or give us a call.
Contaminant
Removal
The
Custom Pure MB Series effectively removes a variety
of contaminants, including:
| Chlorine |
Rust |
Copper
|
Sulfate |
| Fluoride |
Arsenic |
Nitrate |
Chloroform |
| Lead |
Asbestos |
Sodium |
Giardia |
| Total
Dissolved Solids |
Volatile
Organic Chemicals |
|
|
Parasite
removal is also available for applications where high
flow rates are not a critical priority.
*Contaminant
removal is defined as contaminants not found in filtered
water at lowest detectable level in third party testing.
Available upon request.
Note
that the MB Series Filter is intended for use on microbiologically
safe water. If it is to be used on water known to be
microbiologically unsafe, then additional water treatment
equipment would be required to disinfect the water.
Features
The
Commercial MB Series comes with many attractive features:
- Custom
fit for your particular needs.
- Can
be built with our standard "Speedfit" fittings,
compression or garden hose fittings.
- Can
use a variety of resin tank sizes and cartridges
for different needs in flow rate and contaminant
removal.
- Adjustable
to accommodate future changes in water quality or
capacity needs.
-
Optional water quality monitor to alert you when the
filter needs servicing.
- Optional
UV light, ceramic or membrane cartridges for bacteriological
protection.
- Separate
lead-free stainless steel faucet.
- Superior
housing and installation materials provide "no-leak"
peace of mind.
- Professional
installation and service is available in greater Seattle
area only. Replacement filters gladly shipped via
UPS.
- Limited
Life Time Warranty.
Dimensions
|
MB818/BB10
|
Resin
818 tank 9" diameter x 21.5" tall
BB10 Post Filter: 8" diameter x 18.5" tall
|
|
MB818/
20" Tandem
|
Resin
818 tank 9" diameter x 21.5" tall
20" Tandem Post Filter: 22" tall x 9.5" wide x
5.25" deep
|
Applications
The
Commercial MB Series has been used in the following
applications. (Some applications use larger capacity
models than shown on this page.
- Office
drinking water
- Espresso
machines
- Restaurants
- water for guests and water in food preparation
- Grocery
stores - produce misters and deli areas
- Aquariums
- Indoor
plants
- Window
washing
- Industrial
Equipment requiring demineralized water:
- cooling
water for plasma torch
- commercial
steamers
- humidifiers
- radiant
heating systems
- Water
recirculating units
- Filtered
water used in production and processing
- Cleaning
salt water out of turbo prop engines
- Final
rinse water for circuit boards, laser equipment and
laboratory glassware
- Make
up water for soap making, batteries, printing, cosmetics
and laboratory reagents
|